Nacházíte se zde: Úvod / Sekce pro zákazníky / Lékárna u Bílého Lva / Topologie

Topologie

IPINY

193.85.164.243   LÉKÁRNA
62.141.31.203     GSM ALEŠ
193.85.164.173   SVR PRAHA
193.85.164.121   SVR BRNO
212.96.165.94     ÚČTO

193.85.164.243 IP Hraba pro Cytrix


Modem Zyxel Prestige 660

wan 193.85.164.129

lan 172.16.0.1

admin/maugli

PPPoA

ad18392

ui8xe5n9

Pro režim Bridge údajně:

MASK: 255.255.255.255

GW: 194.213.33.13

DNS:193.85.1.10

Firewall DLINK200

WAN 172.16.0.1

LAN 192.168.1.1

admin/maugli


SWITCH DLINK DES3526

konfigurační IP 192.168.1.61

Porty 1-17, 26 lékárna
24        GW
22-23   PRAKTIK
20-21   INTERNA
18-19   HRABA
25        UPLINK
26        SERVER

#-------------------------------------------------------------------
#                       DES-3526 Configuration
#
#                       Firmware: Build 4.01-B19
#        Copyright(C) 2000-2005 D-Link Corporation. All rights reserved.
#-------------------------------------------------------------------


# BASIC

config serial_port baud_rate 9600 auto_logout 10_minutes
enable telnet 23
enable web 80
config cli_line default

# STORM

config traffic control_trap none
config traffic control 1-5 broadcast disable multicast disable dlf disable  act0

# GM

config sim candidate
disable sim
config sim dp_interval 30
config sim hold_time 100

# SYSLOG

disable syslog
config system_severity trap information
config system_severity log information

# QOS

config scheduling 0 max_packet 0 max_latency 0
config scheduling 1 max_packet 0 max_latency 0
config scheduling 2 max_packet 0 max_latency 0
config scheduling 3 max_packet 0 max_latency 0
config 802.1p user_priority 0  1
config 802.1p user_priority 1  0
config 802.1p user_priority 2  0
config 802.1p user_priority 3  1
config 802.1p user_priority 4  2
config 802.1p user_priority 5  2
config 802.1p user_priority 6  3
config 802.1p user_priority 7  3
config 802.1p default_priority 1-26 0
config bandwidth_control 1-26 rx_rate no_limit tx_rate no_limit

# MIRROR

disable mirror

# TRAF-SEGMENTATION

config traffic_segmentation 1-26 forward_list 1-26

# PORT

config ports 1-26 speed auto flow_control disable learning enable state enable

# PORT_LOCK

disable port_security trap_log
config port_security ports 1-26 admin_state disable max_learning_addr 1 lock_adt

# 8021X

disable 802.1x
config 802.1x auth_protocol radius_eap
config 802.1x capability ports 1-26 none
config 802.1x auth_parameter ports 1-26 direction both port_control auto quiet_e

# SNMPv3

delete snmp community public
delete snmp community private
delete snmp user initial
delete snmp group initial
delete snmp view restricted all
delete snmp view CommunityView all
config snmp engineID 800000ab0300179abb1723
create snmp view restricted 1.3.6.1.2.1.1 view_type included
create snmp view restricted 1.3.6.1.2.1.11 view_type included
create snmp view restricted 1.3.6.1.6.3.10.2.1 view_type included
create snmp view restricted 1.3.6.1.6.3.11.2.1 view_type included
create snmp view restricted 1.3.6.1.6.3.15.1.1 view_type included
create snmp view CommunityView 1 view_type included
create snmp view CommunityView 1.3.6.1.6.3 view_type excluded
create snmp view CommunityView 1.3.6.1.6.3.1 view_type included
create snmp group public v1 read_view CommunityView notify_view CommunityView
create snmp group public v2c read_view CommunityView notify_view CommunityView
create snmp group initial v3  noauth_nopriv read_view restricted notify_view re
create snmp group private v1 read_view CommunityView write_view CommunityView n
create snmp group private v2c read_view CommunityView write_view CommunityView
create snmp group ReadGroup v1 read_view CommunityView notify_view CommunityVie
create snmp group ReadGroup v2c read_view CommunityView notify_view CommunityVi
create snmp group WriteGroup v1 read_view CommunityView write_view CommunityVie
create snmp group WriteGroup v2c read_view CommunityView write_view CommunityVi
create snmp community private view CommunityView read_write
create snmp community public view CommunityView read_only
create snmp user initial initial

# MANAGEMENT

enable snmp traps
enable snmp authenticate traps
config snmp system_name DES-3526
disable rmon

# VLAN

disable asymmetric_vlan
config vlan default delete 1-26
config vlan default add untagged 1-26
config vlan default advertisement enable
disable gvrp
config gvrp 1-26 state disable ingress_checking enable acceptable_frame admit_a1

# FDB

config fdb aging_time 300
config multicast port_filtering_mode 1-26 forward_unregistered_groups

# MAC_ADDRESS_TABLE_NOTIFICATION

config mac_notification interval 1 historysize 1
disable mac_notification
config mac_notification ports 1-26 disable

# STP

config stp maxage 20 maxhops 20 forwarddelay 15 txholdcount 3 fbpdu enable
config stp version rstp
config stp priority 32768 instance_id 0
config stp hellotime 2
config stp lbd enable
config stp lbd_recover_timer 60
config stp mst_config_id name 00:17:9A:BB:17:23 revision_level 0
disable stp
config stp ports 1-26 externalCost auto edge false p2p auto state enable
config stp ports 1-26 lbd disable
config stp mst_ports 1-26 instance_id 0 internalCost auto priority 128
config stp ports 1-26 fbpdu disable

# SSH

config ssh server maxsession 8
config ssh server contimeout 300
config ssh server authfail 2
config ssh server rekey never
disable ssh

# SSL

disable ssl
enable ssl ciphersuite RSA_with_RC4_128_MD5
enable ssl ciphersuite RSA_with_3DES_EDE_CBC_SHA
enable ssl ciphersuite DHE_DSS_with_3DES_EDE_CBC_SHA
enable ssl ciphersuite RSA_EXPORT_with_RC4_40_MD5
config ssl cachetimeout timeout 600

# SAFE_GUARD

config safeguard_engine state disable cpu_utilization rising_threshold 100 falle

# ACL
disable cpu_interface_filtering

# SNTP

disable sntp
config time_zone operator - hour 6 min 0
config sntp primary 0.0.0.0 secondary 0.0.0.0 poll-interval 720
config dst disable

# IPBIND
disable address_binding acl_mode
disable address_binding trap_log


# ROUTE


# LACP

config link_aggregation algorithm mac_source
config lacp_port 1-26 mode passive

# IP

config ipif System vlan default ipaddress 192.168.1.163/24 state enable
disable autoconfig

# ARP

config arp_aging time 20

# SNOOP

disable igmp_snooping
config igmp_snooping default host_timeout 260 router_timeout 260 leave_timer 2 e
config igmp_snooping querier default query_interval 125 max_response_time 10 ro
config igmp_snooping querier default last_member_query_interval 1 state disable

# ACCESS_AUTHENTICATION_CONTROL

config authen_login default method local
config authen_enable default method local_enable
config authen application console login default
config authen application console enable default
config authen application telnet login default
config authen application telnet enable default
config authen application ssh login default
config authen application ssh enable default
config authen application http login default
config authen application http enable default
config authen parameter response_timeout 30
config authen parameter attempt 3
disable authen_policy

# DHCP_RELAY

disable dhcp_relay
config dhcp_relay hops 4 time 0
config dhcp_relay option_82 state disable
config dhcp_relay option_82 check disable
config dhcp_relay option_82 policy replace

#-------------------------------------------------------------------
#             End of configuration file for DES-3526
#-------------------------------------------------------------------


SWITCH DLINK DES3226


Server

IP 192.168.1.2
administrator/maugli


Akce dokumentů

Přihlášení


Nepamatujete si své heslo?
« prosinec 2018 »
prosinec
PoÚtStČtSoNe
12
3456789
10111213141516
17181920212223
24252627282930
31